Extreme Sensors for the Most Challenging Environments.     Check out our full line of accessories to complement your photoelectric systems.     Let us help you source those hard-to-find replacement parts from Europe — we will save you time and money.     Pantron Automation is proud to be the North American distributor for Fuchs Umwelttechnik, GmbH, manufacturer of high-quality fume and particulate extraction equipment.     If you have an application that’s causing problems, let us help you solve it with high-quality industrial sensors and controls that are designed to endure the worst conditions on the planet.     Are you interested in being a distributor for Pantron? Contact our Belmont office for details.     Need proximity sensors for extremely hot or cold environments? Check out the products offered by the German manufacturer, EGE Elektronik.    

Application Questionnaire

To recommend the right extraction and filtration device for your process, we need details about your application. Fill out as many fields as apply — not every question will be relevant to your setup. We'll review your answers and follow up with a tailored recommendation.

Fields marked * are required.

automation
in partnership with
Fuchs Umwelttechnik
Contact Details
Existing Equipment
Laser Process
e.g. marking, inscribing, cutting, welding, engraving, etc.
Provide manufacturer, model, wavelength, and power (watts) if known
Provide dimensions (L × W × H) and total volume if known
e.g. DMC code, text marking, dimensions, depth, size of welding seam, width and depth of cutting line, cutting speed, etc.
Materials & Emissions
If plastics, provide the exact type and note if an SDS (Safety Data Sheet) is available
Provide “worst case” estimates — e.g. Liter/hour, kg per day, grams per cycle
e.g. fine dust, coarse dust, chips, gases, vapors, oil mist, odors, smoke, or a combination
Extraction System
e.g. directly next to the station, in a separate room, overhead — include layout notes or describe a sketch
If several, additional information exchange will be needed
e.g. top, sideward, bottom
Approximate distance in mm
e.g. round ø 50mm, multiple slots — number of slots and size of each
e.g. clean room classification, food-safe environment, standard assembly line, ATEX zone, etc.
Pipeline & Infrastructure
Longer runs increase pressure loss — keep short where possible
Measurement in mm
e.g. spark catcher, flow channels, disturbance sources that affect extraction, bends, silencers, etc.
Safety & Hazardous Areas

If yes, please contact our representatives for assistance.

Additional Notes
We typically respond within one business day.

Contact Us

Share a few details below and our team will respond with recommended options, pricing, and lead time.

We typically respond within one business day.