Opto Edge Controller by EGE         

Opto Edge Controller

Manufacturer: EGE Elektronik
Category: Opto sensors

The Opto Edge controller works with infra-red light which issues extremely short and fast impulse sequences that enable reliable recording of rapidly occurring processes, even in the presence of influences from external rays. The process control system which is determined by the user, as well as the design of the optical converter, demands a high degree of flexibility from the system.

Description

Here you will find cross section converters to control the edges of bands or detect band interruptions as well as high performance photoelectric barriers and reflex sensors for large distances.

The Opto Edge controller consists of an amplifier to which two fibre-optic cables of up to 10 m in length can be connected via a rapid action coupling. The first fibre-optic cable routes a send signal generated by the amplifier to a first optical converter, while the second fibre-optic cable returns a send signal detected by a second optical converter (4) to the amplifier as a receiving signal. This receiving signal is processed further in the amplifier into an output control signal.

Downloads and Info


Notifications

The operation of EGE Opto sensors is not authorized for applications where the safety of a person depends on the device function.