ISG-N34 Infrared Photoelectric Amplifier

Manufacturer: Pantron Instruments, GmbH
Category: Infrared Photoelectric Amplifiers

Pantron amplifiers operate with modulated infrared light which provides high immunity to ambient light. The electronic circuit is designed to detect only those signals with the correct frequency and phase relation. This almost completely excludes interference from other barriers.

Features and Specifications

  • Detection range up to 70 m (230 ft)
  • Sensitivity adjustable with potentiometer
  • Relay output
  • Transistor output npn / pnp
  • Adjustable switch-ON and switch-OFF delay
  • Test input
  • 4 different selectable transmit frequencies
  • System power 20% / 100% switchable
  • Switching mode light / dark selectable
Sensing range (Through-beam configuration)
Range (using transmitter ITL combined with receiver IRL / IRH) 20 m / 25 m (66 ft / 82 ft)
Range (using transmitter ITH combined with receiver IRL / IRH) 30 m / 35 m (98 ft / 115 ft)
Range (using transmitter ITA combined with receiver IRL / IRH) 50 m / 70 m (164 ft / 230 ft)
Technical Data at +68 °F
Supply voltage see "Available Types"
Operating basis modulated IR light
Transmit power manual adjustment
Transmit frequency 3.5, 3.8, 4.0, 4.5 kHz
Switching function light / dark switchable
System power 20% / 100% switchable
Switching delay 0 ... 10 seconds
Relay output 1 changeover
   Max. load 5 A / 230 V AC (24 V DC)
   Switching frequency 12 Hz
Transistor output DC: npn / pnp, 100 mA (30 VDC)
AC: npn / pnp, 5 MA (12 VDC)
   Switching frequency 20 Hz
Alarm output -
   Max. load -
Test input 24 VDC
Housing material plastic
Protection class IP 40
Operation temperature -13 °F ... +140 °F
Available Types
Part number
ISG-N34/230VAC
ISG-N34/115VAC
ISG-N34/24VAC
ISG-N34/24VDC
Approvals

Notifications

The operation of infrared amplifier ISG... is not authorized for applications where the safety of a person depends on the device function.