11-pole Amplifier Socket for DIN-rail Mounting and Retaining Clip

Manufacturer: Finder
Category: Infrared Photoelectric Accessories

The DIN rail socket is used for the wiring of amplifiers which have an 11-pole plug. It is possible to attach it onto a DIN-rail or to mount it with a center screw on an assembly plate. A plastic peg with anti-rotation feature is located at the back side.

The retaining clip RTC11 should be mounted under the socked to secure the amplifier against vibrations and prevent it from becoming disconnected. It is recommended to use the RTC11 clip with all Pantron power supply units PSU-N due to the weight of the power supply.

Features and Specifications

  • Connects to 35 mm DIN rail (EN 60715)
  • Connection point for entire photoelectric system
  • Holds amplifier or multiplexer securely in place
Technical Data for MB11 at +68 °F
Rated values 10 A - 250 V
Dielectric strength 2 kV AC
Protection category IP 20
Ambient temperature -40 … +70°C
Screw torque 0.5 Nm
Wire strip length 10 mm
Max. wire size (solid or stranded) 1x10 / 2x14 AWG
Available Types
Part number
MB11 (socket)
RTC 11 (Retaining clip)

Dimensional Drawings (in mm)


The operation of amplifier socket MB11 or retaining clip RTC 11 is not authorized for applications where the safety of a person depends on the device function.