PANTRONISG-N37 series11-pole DIN plug

ISG-N37

The ISG-N37 combines the configurable switching, alarm signaling, and relay / transistor outputs of the ISG family with a 0 ... 10 second switching delay. It is suited to demanding long-range sensing tasks where both timing control and alarm monitoring are required.

Datasheet PDF Operating Guide PDF

Up to 70 m range 0 ... 10 s delay Alarm output 3.5 / 3.8 / 4.0 / 4.4 kHz Relay + NPN/PNP Light / dark selectable

Key Features

Sensitivity adjustable with front potentiometer.
Selectable low / high basic transmit level.
Selectable light / dark switching behavior.
Four selectable transmit frequencies.
Relay change-over plus transistor output and separate alarm output.
Adjustable 0 ... 10 second switching delay.

Best Fit Applications

Gate, conveyor, and process applications needing delayed switching.
Installations that need alarm signaling for optical reserve or faults.
Contamination-heavy environments with long range requirements.
Retrofits requiring both relay and transistor interfaces.

Catalog source: Pantron catalog pages 21-25, depending on model. Values shown here follow the published catalog page for this specific amplifier variant.

Technical Specifications

Operating voltage	See order code table
Operating basis	Modulated infrared light
Transmit frequency	3.5 / 3.8 / 4.0 / 4.4 kHz
Transmit power	Manual
Basic transmit level	Low / High
Switching behaviour	Light / Dark
Switching delay	0 ... 10 s
Housing material	Plastic

Switching output	Relay, change over
Relay rating	5 A / 230 V AC (24 V DC)
Transistor output	NPN / PNP, 100 mA / 30 V DC
Alarm output	NPN / PNP, 100 mA / 30 V DC
Reaction time	36 ms
Test input	-
Protection class	IP40 (EN 60529)
Dimensions	40 x 76.5 x 80 mm

Order Codes by Supply Voltage

Supply	Order code
230 V AC / ±10% / 3.8 VA	ISG-N37/230VAC
115 V AC / ±10% / 3.8 VA	ISG-N37/115VAC
24 V AC / ±10% / 3.8 VA	ISG-N37/24VAC
24 V DC / ±20% / 2.0 W	ISG-N37/24VDC

Accessories listed in the catalog for this family include PanBox 1x1 protective enclosure, ISO1 11-pole DIN socket, and RTC 11 retaining clip.

Maximum Through-Beam Range

Transmitter family	Receiver IRL-...	Receiver IR-...
Transmitter IT-..., ITL-...	20 m	25 m
Transmitter IT-...HP, ITH-...	30 m	35 m
Transmitter ITA-...	50 m	70 m

Maximum range depends on the selected Pantron transmitter / receiver pair and installation conditions.