PANTRONPanBox 1x1Protective Enclosure

PanBox 1x1

PanBox 1x1 is a protective enclosure designed for mounting Pantron amplifiers in humid or dirty environments and in outdoor applications. It is part of the PanBox family, includes a DIN rail, and uses a transparent top cover with pre-assembled cable glands for a clean and serviceable installation.

Datasheet PDF

IP66DIN rail includedTransparent top coverM12 and M16 glandsPolycarbonate housingOutdoor use

Key Features

Designed for humid, dirty, and outdoor amplifier installations.
Impact-resistant polycarbonate construction.
Transparent top cover allows quick status inspection.
Protection class IP66 for strong environmental resistance.
Pre-assembled cable glands for sensor cables, supply, and circuit lines.
Integrated DIN rail supports fast and clean amplifier mounting.

Best Fit Applications

Protecting a single-channel Pantron amplifier where washdown, dust, or weather exposure is present.
Outdoor installations where a standard control cabinet is not practical.
Machine retrofits that need a compact local enclosure near the sensing point.
Projects where service teams benefit from a visible cover and organized cable entry.

PanBox 1x1 is the compact PanBox version sized for one single-channel amplifier such as the Pantron ISG-... or ISM-1... families.

Technical Specifications

Housing material, top cover	Polycarbonate
Housing material, bottom cover	Glass fibre-reinforced polycarbonate
Colour, top cover	Transparent
Colour, bottom cover	Grey RAL 7035

Gasket	Polyurethane
Ambient temperature	-40 °C ... +120 °C (-40 °F ... +248 °F)
Permanent temperature	+80 °C (+176 °F)
Protection class	IP66
Cable glands	M12 and M16
Internal mounting	DIN rail included

Ordering Information

Order code	Suitable for the amplifiers	Dimensions W x H x D
PanBox 1x1	1 x single channel opto sensor ISG-... or ISM-1...	130 x 130 x 125 mm
PanBox 1x2	1 x dual channel opto sensor IMX-N2... / IMX-N3... / IMX-A20... / ISM-2... / ICL-2...	130 x 130 x 125 mm
PanBox 3x1	3 x single channel opto sensor ISG-... or ISM-1...	180 x 130 x 125 mm
PanBox 1x4	1 x 4-channel opto sensor IMX-N4... or ISM-4...	180 x 130 x 150 mm
PanBox 1x8	1 x 8-channel opto sensor IMX-N8... / IMX-A8... / ISM-8... / ICL-8...	255 x 162 x 150 mm

PanBox 1x1 Selection Notes

Use this version when the application needs one single-channel amplifier in a protected local enclosure.
The transparent lid helps with quick inspection of indicators and settings.
The DIN rail simplifies clean installation and future service replacement.
Choose a larger PanBox variant if the channel count or amplifier footprint increases.

The PanBox family is intentionally modular, so the 1x1 version works best where compact size matters and only one amplifier must be housed.

Integration Notes

Match the enclosure size to the specific amplifier family before installation.
Use the supplied gland arrangement to keep cable routing sealed and orderly.
Where vibration is present, combine the enclosure with the correct socket and retaining accessories as needed.
Because the enclosure is intended for humid, dirty, and outdoor use, it is a strong choice for remote machine-side installation.

This page is focused on the PanBox 1x1 product image already included in your site package while also preserving the broader PanBox family ordering table from the manufacturer page.