PANTRONICL-6000/24VDC

ICL-6000

The ICL-6000 expands the ICL platform to six channels while keeping manual or automatic operation, selectable switching mode, analog output, alarm output, diagnostic test button, RS232 configuration, and primary/secondary functionality for contamination-heavy applications.

Datasheet PDF Software

6 channelsUp to 35 m rangePNP outputs0 ... 10 V outputRS232Primary/Secondary

Key Features

Six-channel multiplexing with individual output channels.
Manual or automatic transmit-power operation.
Selectable light / dark switching behavior.
Short-circuit-proof PNP outputs and alarm output.
RS232 configuration with WinICL software.
Vehicle-wash-focused tuning and ambient-light resistance.

Best Fit Applications

Larger vehicle wash installations requiring six sensing channels.
Industrial systems that benefit from centralized open-frame multiplex control.
Installations needing analog monitoring and PC-based setup.

Technical Specifications

Operating voltage	24 V DC / ±20% / 4.2 W
Operating basis	Modulated infrared light
Transmit frequency	4.0 kHz
Transmit power	Manual / Automatic
Basic transmit level	Low1 / Low2 / High1 / High2
Switching behaviour	Light / Dark
Multiplex speed	34 ms

Switching output	6x PNP, short circuit proof
Output rating	100 mA / 24 V DC
Reaction time	36 ms
Alarm output	PNP, short circuit proof, 100 mA / 24 V DC
Analog output	0 ... 10 V DC
COM interface	RS232
Dimensions	111 x 111 x 55 mm

Compatible Sensor Pairs and Maximum Through-Beam Range

Transmitter family	With receiver IRL-...	With receiver IR-...	Typical use note
IT-..., ITL-...	5 m	15 m	Compact range
IT-...HP, ITH-...	8 m	20 m	High-power range
ITA-...	14 m	35 m	Longest stated range

Maximum range values shown are for through-beam installations using the listed Pantron transmitter and receiver families.

Ordering and Accessories

Connection / Variant	Order code
Plug (spring clamp terminals)	ICL-6000/24VDC

Accessory	Order code
Protective enclosure	PanBox 1x8
Power supply	PSU-1000S/95...265VAC
Communication cable	CAB-COM-2
PC software	WinICL

Device Notes

The catalog highlights programmable DIP-switch functions and higher insensitivity to ambient light.
Housing is open frame and intended for panel integration.