PANTRONISG-N34 series11-pole DIN plug

ISG-N34

The ISG-N34 shares the configurable switching, frequency selection, and relay / transistor output set of the ISG-N24, and adds an adjustable 0 ... 10 second switching delay. It is built for installations that need debounce or timing control at the amplifier stage.

Datasheet PDF Operating Guide PDF

Up to 70 m range 0 ... 10 s delay 3.5 / 3.8 / 4.0 / 4.4 kHz Light / dark selectable Relay + NPN/PNP Test input

Key Features

All ISG-N24 configuration functions plus adjustable switching delay.
Sensitivity adjustable with front potentiometer.
Selectable low / high basic transmit level.
Selectable light / dark switching behavior.
Relay change-over and NPN / PNP transistor outputs.
24 V DC test input for validation and commissioning.

Best Fit Applications

Conveyor or gate applications that need delayed switching.
Contamination-heavy environments where timing stability matters.
Industrial retrofits requiring both relay and transistor interfaces.
Installations where transmit frequency selection helps reduce interference.

Catalog source: Pantron catalog pages 21-25, depending on model. Values shown here follow the published catalog page for this specific amplifier variant.

Technical Specifications

Operating voltage	See order code table
Operating basis	Modulated infrared light
Transmit frequency	3.5 / 3.8 / 4.0 / 4.4 kHz
Transmit power	Manual
Basic transmit level	Low / High
Switching behaviour	Light / Dark
Switching delay	0 ... 10 s
Housing material	Plastic

Switching output	Relay, change over
Relay rating	5 A / 230 V AC (24 V DC)
Transistor output	NPN / PNP
Transistor rating	100 mA / 30 V DC
Reaction time	36 ms
Test input	24 V DC
Protection class	IP40 (EN 60529)
Dimensions	40 x 76.5 x 80 mm

Order Codes by Supply Voltage

Supply	Order code
230 V AC / ±10% / 3.8 VA	ISG-N34/230VAC
115 V AC / ±10% / 3.8 VA	ISG-N34/115VAC
24 V AC / ±10% / 3.8 VA	ISG-N34/24VAC
24 V DC / ±20% / 2.0 W	ISG-N34/24VDC

Accessories listed in the catalog for this family include PanBox 1x1 protective enclosure, ISO1 11-pole DIN socket, and RTC 11 retaining clip.

Maximum Through-Beam Range

Transmitter family	Receiver IRL-...	Receiver IR-...
Transmitter IT-..., ITL-...	20 m	25 m
Transmitter IT-...HP, ITH-...	30 m	35 m
Transmitter ITA-...	50 m	70 m

Maximum range depends on the selected Pantron transmitter / receiver pair and installation conditions.