PANTRONISM-4800/24VDC

ISM-4800

4-channel menu-driven infrared multiplexer with display or PC software setup. The ISM-4800 is a four-channel multiplexer for demanding environments with manual or automatic operation, light or dark switching, adjustable delay, analog output, and primary/secondary capability. It is especially positioned for vehicle wash systems and similar contamination-heavy applications.

Datasheet PDF Operating Guide PDF Software

4 channelsUp to 60 m rangeRS232Analog outputDisplay setup

Key Features

Menu-driven operation with front display or PC software.
Manual or automatic transmit-power selection.
Selectable light / dark switching behavior.
Adjustable switching delay from 0 to 60 s.
Alarm output, error output, analog output, and test inputs.
Primary/Secondary support for system expansion.

Best Fit Applications

Vehicle wash systems with multiple sensing zones.
Multi-channel opposed-mode monitoring with centralized tuning.
Installations needing software configuration and analog feedback.

Technical Specifications

Operating voltage	24 V DC / ±20% / 6.5 W
Operating basis	Modulated infrared light
Transmit frequency	4.0 kHz
Transmit power	Manual / Automatic
Basic transmit level - manual	Low / High
Basic transmit level - automatic	Low1 / Low2 / High1 / High2
Switching delay	0 ... 60 s

Switching output	4x semiconductor relay, normally open
Output rating	100 mA / 60 V AC (DC)
Reaction time	20 ms
Alarm / Error output	PNP / PNP, 100 mA / 24 V DC
Analog output	0 ... 10 V DC or 10 ... 0 V DC
COM interface	RS232
Dimensions	106 x 90 x 58.5 mm

Compatible Sensor Pairs and Maximum Through-Beam Range

Transmitter family	With receiver IRL-...	With receiver IR-...	Typical use note
IT-..., ITL-...	10 m	15 m	Standard transmitter family
IT-...HP, ITH-...	12 m	25 m	High-power range
ITA-...	25 m	60 m	Longest stated range

Maximum range values shown are the catalog values for through-beam installations using the listed Pantron transmitter and receiver families.

Ordering and Accessories

Connection / Variant	Order code
Plug (screw terminals)	ISM-4800/24VDC

Accessory	Order code
Protective enclosure	PanBox 1x4
Power supply	PSU-1000S/95...265VAC
Communication cable	CAB-COM-2
PC software	WinISM

Device Notes

The catalog describes this model as especially suited for vehicle wash applications.
Front display provides channel status and gain-control indication; PC software expands configuration options.