PANTRONISM-8800/24VDC

ISM-8800

8-channel menu-driven infrared multiplexer for large multi-beam sensing systems. The ISM-8800 is an eight-channel multiplexer designed for harsh applications such as vehicle wash systems. It combines manual or automatic operation, selectable switching mode, analog output, alarm/error outputs, and primary/secondary capability in a higher-density DIN-rail package.

Datasheet PDF Operating Guide PDF Software

8 channelsUp to 60 m rangeRS232Analog outputPrimary/Secondary0 ... 60 s delay

Key Features

Eight independent channels with display-based status indication.
Manual or automatic transmit-power selection.
Selectable light / dark switching behavior.
Adjustable switching delay from 0 to 60 s.
Analog output plus alarm and error outputs.
Primary/Secondary support and PC configuration.

Best Fit Applications

Large multi-channel wash-system sensing arrays.
Multi-zone industrial opposed-mode monitoring.
Installations needing centralized diagnostics and software setup.

Technical Specifications

Operating voltage	24 V DC / ±20% / 8.5 W
Operating basis	Modulated infrared light
Transmit frequency	4.0 kHz
Transmit power	Manual / Automatic
Basic transmit level - manual	Low / High
Basic transmit level - automatic	Low1 / Low2 / High1 / High2
Switching delay	0 ... 60 s

Switching output	8x semiconductor relay, normally open
Output rating	100 mA / 60 V AC (DC)
Reaction time	36 ms
Alarm / Error output	PNP / PNP, 100 mA / 24 V DC
Analog output	0 ... 10 V DC or 10 ... 0 V DC
COM interface	RS232
Dimensions	158.5 x 90 x 58.5 mm

Compatible Sensor Pairs and Maximum Through-Beam Range

Transmitter family	With receiver IRL-...	With receiver IR-...	Typical use note
IT-..., ITL-...	10 m	15 m	Standard transmitter family
IT-...HP, ITH-...	12 m	25 m	High-power range
ITA-...	25 m	60 m	Longest stated range

Maximum range values shown are for through-beam installations using the listed Pantron transmitter and receiver families.

Ordering and Accessories

Connection / Variant	Order code
Plug (screw terminals)	ISM-8800/24VDC

Accessory	Order code
Protective enclosure	PanBox 1x8
Power supply	PSU-1000S/95...265VAC
Communication cable	CAB-COM-2
PC software	WinISM

Device Notes

The front panel provides channel-status indication for all eight channels.
This model is especially suited for vehicle wash applications.